Silicone Shoe Covers are designed to keep your feet warm and dry in cold, wet weather.
They are made to provide more insulation than our 2.0 Tall Shoe Covers. Waterproof and windproof silicone material provides excellent protection for your feet from the elements.
To improve the ease of installation, we added snap buttons at the bottom of shoe covers which can be fastened easily under your cycling shoes.
The silicone material is also very flexible to form a smooth snug fit over the dials and buckles of your cycling shoes.
The cleat and heel pad openings are large enough to fit most gravel cycling shoes.
Whether it’s race day, training day, gravel day, or just another commute day, veloToze Silicone Shoe Covers will keep your feet dry and comfortable.
Designed for 5 C in dry, sunny weather to 15 C in wet, rainy weather.
Features
- Waterproof: designed to form a tight seal with your calf, to keep your feet and shoes dry
- Windproof: windproof material keep your feet warm even on cold mornings or winter rides (5C to 15C)
- Reinforced: added protection across the bottom and toe of the shoe cover
- Lightweight: made of a flexible, lightweight material that doesn’t retain water when wet
- No zippers or velcro straps: innovative overshoe design has no vulnerability points, like zippers or velcro
- Aerodynamic: smooth, flexible material creates a form-fitting design
- Compact: easily fits in jersey pocket or saddle bag
Size Chart
| VELOTOZE SIZE |
S |
M |
L |
LX |
| EU SHOE SIZE |
37-40 |
40.5-42.5 |
43-46 |
46.5-49 |
| US SHOE SIZE (M) |
5-7 |
7.5-9.5 |
10-12.5 |
13-15 |
| US SHOE SIZE (W) |
6.5-9 |
9.5-11.5 |
12-14 |
– |
Instructions
- Put on sock
- Pull shoe cover on over sock
- Put foot through large cleat hole, and pull shoe cover up around ankle
- Put on mountain bike shoe
- Pull shoe cover down over heel of shoe FIRST, then toe
- Adjust around ankle, cleat and heel pad. Ensure no part of shoe cover are over cleat or heel pad.
Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.
Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.
Materials
Care Instructions
- To clean shoe covers, wipe with a cool, wet cloth.
- Do not put shoe covers in clothes washer.
- To dry, hang shoe covers over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly.
- Do not put shoe covers in clothes dryer.
- After repeated use, apply talcum or baby powder to inside of shoe cover to prevent sticking.
Pro Tips
- Avoid contact with sharp objects
- Do not store in direct sunlight
- Ensure shoe covers are pulled-up over socks and are under legwarmers to create a water-tight seal
- To prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening
- Apply talcum powder or baby powder after using the shoe covers to make them easier to put on
Caution
THIS PRODUCT CONTAINS NATURAL RUBBER LATEX WHICH MAY CAUSE ALLERGIC REACTIONS.
FAQ
Are they really waterproof?
- veloToze products are made from a waterproof, flexible material. The Tall Shoe Covers form a seal around your calf to prevent water from entering the shoe cover and the waterproof material keeps water out on the sides
- To ensure water doesn't enter through the cleat holes in the bottom of your shoe, you may need to put a small piece of tape over the vent hole. Here's a video to show you how do to that.
How long do they last?
- veloToze products are designed to be used multiple times, but if you take them on and off carefully and follow the proper care instructions, they can last longer.
Do they breathe?
- veloToze products are made of a waterproof fabric that allows some vapor transfer. As with most waterproof materials, the fabric has mitigated breathing ability, which will result in some heat and sweat build-up inside the shoe cover. The design of the Short Shoe Cover, Toe Cover and Helmet Cover allow moisture to escape more easily.
Will they make my feet hot?
- veloToze shoe covers are designed to be waterproof and wind-proof to keep your feet warm. If the weather is hot or you are riding vigorously, your feet may become hot. If they do, simply remove the shoe cover and store it for your next cold weather ride.
What temperature are they best for?
I’m allergic to latex, can I still use them?
- If you have a latex allergy, you should ask your doctor before using veloToze products.
Do you make a non-latex version?
- We currently do not make a version without latex, but we are always developing new products and may offer one in the future.
Do the shoe covers work for mountain biking or cyclocross?
- veloToze makes shoe covers for Road Cycling shoes with cleats and MTB/Gravel shoes with cleats. The material on the bottom of the shoe is likely to tear if they are worn for walking or running on rough surfaces and are therefore unlikely to last more than one or two times if used for cyclocross or other activities. Also, because they cover a portion of the bottom of the shoe, they may be slippery when walking or running on muddy surfaces.
How do I dry them?
- Hang over a hanger or ledge to dry. The material does not absorb water, so they should dry quickly. Keep away from sharp objects. Do not put in clothes dryers.
