SWISSSTOP BRAKE PAD DISC28 XTR 2011

DISC 28 C

High performance Kevlar, ceramic, brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable).

FITS:

Shimano

• XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985
• XT BR-M8100,BR-M8000,BR-M785
• SLX BR-M7100,BR-M7000,BR-M675,BR-M666
• DEORE BR-M6100,BR-M6000,BR-M615
• ALFINE BR-S700,BR-S7000
• BR-RS785
• BR-R785
• BR-CX75
• BR-R515
• BR-R315

FSA

• K-Force DB-TX-9000
• Afterburner DB-TX-9150

REVER

• MCX1 Post Mount

ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE

Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times.

Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times.

Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2.

CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.