BONT CLEAT T-NUTS (6 PCE)

BONT CLEAT T-NUTS

Bont Cycling shoes feature replaceable T-Nuts for mounting all three-hole cleat systems to the base of the shoe.

Each replacement T-Nut kit contains six individual pieces and is compatible across the entire Bont Cycling range excluding Helix.

Maintenance tips: Bont Cycling t-nuts can be replaced by simply pushing against or punching out the existing t-nuts from the outside of the shoe. The new t-nuts drop into place from the inside of the shoe and the pressure of the cleat bolt installation will allow it to 'bite' into the sole. If your new t-nuts seem to spin too easy, use Loctite 401 or similar to hold them in place for initial tightening.