Tall Shoe Covers Gravel/MTB are designed to protect your gravel or mountain bike shoes from rain, cold, and mud.
They are made with our signature waterproof material which we've reinforced for use on dirt and gravel trails.
They are designed to accommodate bulkier mountain bike shoes and the cleat holes are cut specifically for mountain bike cleats.
Whether you are racing, commuting, or just heading out for an off-road ride, veloToze Tall Shoe Covers Gravel/MTB will keep your feet dry, warm, and comfortable.
Features
Waterproof: designed to form a tight seal with your calf, to keep your feet and shoes dry
Windproof: windproof material keep your feet warm even on cold mornings or winter rides (5C to 15C)
Reinforced: added protection across the bottom and toe of the shoe cover
Lightweight: made of a flexible, lightweight material that doesn’t retain water when wet
No zippers or velcro straps: innovative overshoe design has no vulnerability points, like zippers or velcro
Aerodynamic: smooth, flexible material creates a form-fitting design
Compact: easily fits in jersey pocket or saddle bag
Size Chart
VELOTOZE SIZE
S
M
L
LX
EU SHOE SIZE
37-40
40.5-42.5
43-46
46.5-49
US SHOE SIZE (M)
5-7
7.5-9.5
10-12.5
13-15
US SHOE SIZE (W)
6.5-9
9.5-11.5
12-14
–
Instructions
Put on sock
Pull shoe cover on over sock
Put foot through large cleat hole, and pull shoe cover up around ankle
Put on mountain bike shoe
Pull shoe cover down over heel of shoe FIRST, then toe
Adjust around ankle, cleat and heel pad. Ensure no part of shoe cover are over cleat or heel pad.
Note: Pull top of shoe cover over sock or under leg warmers. The top of the shoe cover needs to be against your skin or water may enter the shoe cover.
Warning: Shoe cover may tear if you do not FIRST put on shoe cover, then shoe.
Materials
100% Latex Rubber
Care Instructions
To clean shoe covers, wipe with a cool, wet cloth.
Do not put shoe covers in clothes washer.
To dry, hang shoe covers over a hanger or ledge or wipe with a dry cloth. The material does not absorb water, so they should dry quickly.
Do not put shoe covers in clothes dryer.
After repeated use, apply talcum or baby powder to inside of shoe cover to prevent sticking.
Pro Tips
Avoid contact with sharp objects
Do not store in direct sunlight
Ensure shoe covers are pulled-up over socks and are under legwarmers to create a water-tight seal
To prevent water from entering the shoe from the bottom of the shoe, remove insole of shoe and place tape over vent opening
Apply talcum powder or baby powder after using the shoe covers to make them easier to put on
Caution
THIS PRODUCT CONTAINS NATURAL RUBBER LATEX WHICH MAY CAUSE ALLERGIC REACTIONS.
FAQ
Are they really waterproof?
veloToze products are made from a waterproof, flexible material. The Tall Shoe Covers form a seal around your calf to prevent water from entering the shoe cover and the waterproof material keeps water out on the sides
To ensure water doesn't enter through the cleat holes in the bottom of your shoe, you may need to put a small piece of tape over the vent hole. Here's a video to show you how do to that.
How long do they last?
veloToze products are designed to be used multiple times, but if you take them on and off carefully and follow the proper care instructions, they can last longer.
Do they breathe?
veloToze products are made of a waterproof fabric that allows some vapor transfer. As with most waterproof materials, the fabric has mitigated breathing ability, which will result in some heat and sweat build-up inside the shoe cover. The design of the Short Shoe Cover, Toe Cover and Helmet Cover allow moisture to escape more easily.
Will they make my feet hot?
veloToze shoe covers are designed to be waterproof and wind-proof to keep your feet warm. If the weather is hot or you are riding vigorously, your feet may become hot. If they do, simply remove the shoe cover and store it for your next cold weather ride.
What temperature are they best for?
The Tall Shoe Covers are designed for temperatures from around 5C to 16C
If you have a latex allergy, you should ask your doctor before using veloToze products.
Do you make a non-latex version?
We currently do not make a version without latex, but we are always developing new products and may offer one in the future.
Do the shoe covers work for mountain biking or cyclocross?
veloToze makes shoe covers for Road Cycling shoes with cleats and MTB/Gravel shoes with cleats. The material on the bottom of the shoe is likely to tear if they are worn for walking or running on rough surfaces and are therefore unlikely to last more than one or two times if used for cyclocross or other activities. Also, because they cover a portion of the bottom of the shoe, they may be slippery when walking or running on muddy surfaces.
